Banner Depositfiles

Unlock Code!!!!

Unlock Code Iphone, Blackberry, Alcatel, LG y HTC,codigos de venta!!! //// Aqui

Busque den Google.

Los Resultado de Google!

LG GS390GO after unlock Yellow Screen. Pantalla Amarilla despues de liberar.

I flashed with the GS290 via USB. Then change the model GS290, I read the phone with RJ45 cable and "REPAIR EEPROM.
This has been fixed.
All Done.
100x100 works.

 


Spanish
Lo he flasheado con una del GS290 via USB. Luego cambio el modelo al GS290, leo el telefono con cable RJ45 y " REPAIR EEPROM".
Con esto se ha arreglado.
Todo Listo.
TRabaja 100x100.

Codigos Liberacion Samsung - Unlock Samsung Code!!!

Do a custom reset:
*2767*2878# once this has finished rebooting turn the phone off.

Now perform a full reset:
*2767*3855#

When the phone powers off, quickly push the SIM card fully in, and let
the phone power back up.

After you do the reset, check and make sure that your Network lock is active by pressing *#7465625#

If it isn't active you must use this code to reactivate it:
*7465625*638*00000000*00000000#

Then you have to deactivate the SP lock first. To do that you need to input:
*7465625*77*00000000*00000000# (this will reset the lock)

Then you enter:
#7465625*77*00000000# (to disable the SP lock).

Then you disable the Network lock:
#7465625*638*00000000#

The phone is finally unlocked. 




Free Samsung Unlock Codes

Samsung SGH-a300
*2767*637#
Samsung SGH-a400
*2767*637#
Samsung SGH-a800
*2767*637#
Samsung SGH-e400
*2767*688#
In newer phones:

#*7337#
Samsung SGH-e500
*2767*688#
In newer phones:

#*7337#
Samsung SGH-e700
*2767*688#
In newer phones:

#*7337#
Samsung SGH-E715
Turn off the phone. Put a non-accepted SIM Card and turn it on. Type *#9998*3323#. Press Exit. Choose menu #7. After phone reboots type *0141# and hit the Call button. Turn off and insert another SIM Card. Turn on. The code is 00000000.
Samsung SGH-m100
Type *#9998*627837793#. Then type *#9998*737#. Press >/[] (Play Stop) until phone shows NCK/SPCK number. Press Exit. Type #0111*CODE# (Code is the last 8 digits of the NCK/SPCK)
Samsung SGH-P400
*2767*3855# or *2767*688# or *2767*927#
In newer Samsung models:

#*7337#
Samsung SGH-s100
*2767*7822573738#
Samsung SGH-s105
Remove SIM Card. Enter *2767*7822573738# and after phone reboots, enter #0111*00000000#
Samsung SGH-s300
*2767*7822573738#
Samsung SGH-s307
Turn off the phone. Put a non-accepted SIM Card and turn it on. Type *#9998*3323#. Press Exit. Choose menu #7. After phone reboots type *0141# and hit the Call button. Turn off and insert another SIM Card. Turn on. The code is 00000000.
Samsung SGH-S500
*2767*3855# or *2767*688# or *2767*927#
Samsung SGH-600
*2767*3855# or *2767*2878#
Samsung SGH-2100
*2767*3855# or *2767*2878#
Samsung SGH-V200
*2767*7822573738#
Samsung SGH-X100
Turn off the phone. Put a non-accepted SIM Card and turn it on. Type *#9998*3323#. Press Exit. Choose menu #7. After phone reboots type *0141# and hit the Call button. Turn off and insert another SIM Card. Turn on. The code is 00000000.
Samsung SGH-X600
Turn off the phone. Put a non-accepted SIM Card and turn it on. Type *#9998*3323#. Press Exit. Choose menu #7. After phone reboots type *0141# and hit the Call button. Turn off and insert another SIM Card. Turn on. The code is 00000000.
Samsung SGH-R210
*2767*3855#
*2767*2878#
Samsung SGH-D500

#*7337#
Samsung Universal Type
TEMPORARY UNLOCK:
Put a non-accepted SIM Card and turn it on. Type *#9998*3323#. Press Exit. You will get a new menu. Select Malloc Fail.

Unlock Motorola WX181 – Liberar Motorola WX181 – Infinity Box – UFC Cables

Unlock Motorola WX181

IMG_0002

wx-series-pinout UFC2 Cable Adapter

IMG_0052

IMG_0046

==== c:\InfinityBox\MModule\MModule.exe [19/04/2011 06:19:41 p.m.] ====
http://www.infinity-box.com
http://www.infinity-best.com
http://www.infinity-cdma.com
http://www.pinfinder-box.com
http://www.language-editor.com
http://www.content-extractor.com

sales department: sales@infinity-box.com

support forum: http://forum.gsmhosting.com/vbb/f296/

Loading data, wait...
[Infinity Box] MModule v3.82
smart-card: connected
S/N: XXXXXXXX

Wait...
Device: Motorola-WX181
Done

==== [19/04/2011 06:22:01 p.m.] ====
COM4 [VCP0] selected
module  v3.82
Device: Motorola-WX181
Checking data, wait...
advanced flash detection enabled
Action: read/check information
====>  Boot ...
Press and HOLD Power button now !
error: can't detect device
Release Power button now !
in case of initial connection problem: on/off "Boot baudrate autoselect"
Boot Fail
Finished, time used: 1 min 35 sec
Remove/Install battery now !

==== c:\InfinityBox\MModule\MModule.exe [19/04/2011 06:48:03 p.m.] ====
http://www.infinity-box.com
http://www.infinity-best.com
http://www.infinity-cdma.com
http://www.pinfinder-box.com
http://www.language-editor.com
http://www.content-extractor.com

sales department: sales@infinity-box.com

support forum: http://forum.gsmhosting.com/vbb/f296/

Loading data, wait...
[Infinity Box] MModule v3.82
smart-card: connected
S/N: XXXXXXXX

Wait...
Device: Motorola-WX181
Done

==== [19/04/2011 06:48:26 p.m.] ====
COM4 [VCP0] selected
module  v3.82
Device: Motorola-WX181
Checking data, wait...
advanced flash detection enabled
Action: read/check information
====>  Boot ...
Press and HOLD Power button now !
error: can't detect device
Release Power button now !
in case of initial connection problem: on/off "Boot baudrate autoselect"
Boot Fail
Finished, time used: 18 sec
Remove/Install battery now !

==== [19/04/2011 06:49:27 p.m.] ====
COM4 [VCP0] selected
module  v3.82
Device: Motorola-WX181
Checking data, wait...
advanced flash detection enabled
Action: read/check information
====>  Boot ...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing [6223:8A05:8A00]...
CPU: MT6223
chip: 0011:4E38:A00C
status: 01
boot packet size: 0400
Release Power button now !
Boot Done
====>  Initialize ...
detecting chip #00 in region #00...
flash: 2088BAFFFFFFFF:2088BA00000000
flash: ST Intel std [def 003Fx010000 0008x002000] 4Mb
otp offset: 003F0000
number of flash chip/regions detected: 01/01
Initialize Done
====>  Set baud ...
921600
Set baud Done
====>  Initialize bootcode ...
Initialize bootcode Done
====>  Check firmware integrity ...
usb bootloader detect...
..
usb bootloader detect (phase #2)...
..
usb bootloader (chip) is absent
searching rom info...
search rom info finished
rom info structure: [standard] type (05)
TCL-ID is present
rom info detection finished
TCL-ID detection...
TCL-ID detection done
rom info ver: 05
sw version: JRD23_NEP_08A_PCB01_GSM_MT6223_S00.MAUI_08A_W08_36_SP1_V28_F1.BIN
project-id: MAUI.08A.W08.36.SP1.V28.F1, 00000000
code offset: 00000000
ffs offset/size [01]: 003A0000/00058000
TCL-ID identification
version: 564
provider: M181AA-2AAVDO1
customization: CM56GR10
customization: XM56GR10
TCL-ID identification done
rom info structure: [standard] type (05)
TCL-ID is present
ffs/eeprom address assigned: 003A0000
sec info (detailed) detection...
searching sec info#1...
search sec info#1 finished
sim-lock status: enabled
product id: JRD_COMMUNICATION_U91X_PRODUCTS
area1 is valid
area2 is valid
area3 is valid
area4 is valid
searching sec info#2...
.
search sec info#2 finished
detecting firmware version...
firmware version: JRD23_NEP_08A_PCB01_GSM_MT6223_S00.MAUI_08A_W08_36_SP1_V28_F1.BIN
detecting firmware build...
.........
firmware date/time: 2010-04-21 18-51
hw1: JRD23_NEP_08A_HW
hw2: 08A_JRD23_NEP_08A
done
detecting product-id...
product-id: U91X
detecting languages...
...........
language parameters detected
detected languages: En Nl Fr Es Pt
original imei: 0000F581454353
file saved: c:\InfinityBox\MModule\backup_security\Motorola-WX181_JRD23_NEP_08A_PCB01_GSM_MT6223_S00.MAUI_08A_W08_36_SP1_V28_F1__system_log__00000000_20110419-185035.B0X.bin
Finished, time used: 1 min 4 sec
Remove/Install battery now !

==== [19/04/2011 06:58:26 p.m.] ====
COM4 [VCP0] selected
module  v3.82
Device: Motorola-WX181
Checking data, wait...
advanced flash detection enabled
Action: rebuild security area
====>  Boot ...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing [6223:8A05:8A00]...
CPU: MT6223
chip: 0011:4E38:A00C
status: 01
error: initialize step #1 failed
Release Power button now !
in case of initial connection problem: on/off "Boot baudrate autoselect"
Boot Fail
Finished, time used: 13 sec
Remove/Install battery now !

==== [19/04/2011 06:59:05 p.m.] ====
COM4 [VCP0] selected
module  v3.82
Device: Motorola-WX181
Checking data, wait...
advanced flash detection enabled
Action: rebuild security area
====>  Boot ...
Press and HOLD Power button now !
19200 fixed
Connecting, wait...
Initializing [6223:8A05:8A00]...
CPU: MT6223
chip: 0011:4E38:A00C
status: 01
boot packet size: 0400
Release Power button now !
Boot Done
====>  Initialize ...
detecting chip #00 in region #00...
flash: 2088BAFFFFFFFF:2088BA00000000
flash: ST Intel std [def 003Fx010000 0008x002000] 4Mb
otp offset: 003F0000
number of flash chip/regions detected: 01/01
Initialize Done
====>  Set baud ...
921600
Set baud Done
====>  Initialize bootcode ...
Initialize bootcode Done
====>  Check firmware integrity ...
usb bootloader detect...
..
usb bootloader detect (phase #2)...
..
usb bootloader (chip) is absent
searching rom info...
search rom info finished
rom info structure: [standard] type (05)
TCL-ID is present
rom info detection finished
TCL-ID detection...
TCL-ID detection done
rom info ver: 05
sw version: JRD23_NEP_08A_PCB01_GSM_MT6223_S00.MAUI_08A_W08_36_SP1_V28_F1.BIN
project-id: MAUI.08A.W08.36.SP1.V28.F1, 00000000
code offset: 00000000
ffs offset/size [01]: 003A0000/00058000
TCL-ID identification
version: 564
provider: M181AA-2AAVDO1
customization: CM56GR10
customization: XM56GR10
TCL-ID identification done
rom info structure: [standard] type (05)
TCL-ID is present
ffs/eeprom address assigned: 003A0000
sec info (detailed) detection...
searching sec info#1...
search sec info#1 finished
sim-lock status: enabled
product id: JRD_COMMUNICATION_U91X_PRODUCTS
area1 is valid
area2 is valid
area3 is valid
area4 is valid
searching sec info#2...
.
search sec info#2 finished
security area (sec info, cust) calculation...
identification header detected
customization: XM56GR10
customization name adjusted
flash: 2088BAFFFFFFFF:2088BA00000000
flash: 2088BAFFFFFFFF:2088BA00000000
Write: security area (sec info, cust)
security area (sec info, cust) calculation done
security area (sec info, hash) calculation...
max address is too big, should be recalculated: 0827D124->0826B790
..................security area (sec info, hash) detecting size...
security area (sec info, hash) detecting parameters...
security area (sec info, hash) encoding...
done
flash: 2088BAFFFFFFFF:2088BA00000000
flash: 2088BAFFFFFFFF:2088BA00000000
Write: security area (sec info, hash)
security area (sec info, hash) calculation done
Check firmware integrity Done
====>  Check firmware content ...
Check firmware content Done
====>  Backup required data ...
original imei: 0000F581454353
flash: 2088BAFFFFFFFF:2088BA00000000
Backup required data Done
====>  Patch required data ...
Patch required data Done
====>  Special operation ...
Special operation Done
====>  Write ...
Write Done
====>  Finalization ...
ffs formatting...
flash: 2088BAFFFFFFFF:2088BA00000000
Finalization Done
file saved: c:\InfinityBox\MModule\backup_security\Motorola-WX181_JRD23_NEP_08A_PCB01_GSM_MT6223_S00.MAUI_08A_W08_36_SP1_V28_F1__system_log__00000000_20110419-190035.B0X.bin
Finished, time used: 1 min 27 sec
Remove/Install battery now !

File system has been modified !
It is need to press and HOLD phone "Power" button
during long time (up to 1 min) to make phone Powered-On !

Cría Cuervos – Toque Profundo

cria-cuervos 1

Descarga

Tracks:
01. Toque Profundo - Botas negras (3:39)
02. Toque Profundo - Cría Cuervos (3:30)
03. Toque Profundo - Dando Asco (4:07)
04. Toque Profundo - Espero que ardas (3:38)
05. Toque Profundo - Fantasma azul (3:59)
06. Toque Profundo - Infidelidad triangular (3:00)
07. Toque Profundo - Levántate (3:14)
08. Toque Profundo - Libérame (3:45)
09. Toque Profundo - Mujer perdida (3:46)
10. Toque Profundo - Noche sin Luna (3:28)
11. Toque Profundo - Tu sombra (3:59)
12. Toque Profundo - Viajero (acústico) (3:47)
13. Toque Profundo - Xxx (3:43)

Sony Ericsson Teoria SETOOL BOX 3

SONY ERICSSON



Teoría y conceptos básicos de Sony Ericsson


Plataformas:

  • Db2000
  • Db2010
  • Db2012
  • Db2020
  • Pnx5130
  • Odm
  • A2
  • Pda



Firmware:

Los equipos de Sony Ericsson básicamente utilizan las siguientes secciones del firmware


·         Main

Es aquel que contiene el sistema operativo del teléfono, es el archivo esencial para el funcionamiento del equipo


·         Fs

Es aquel que contiene los idiomas así como el menú y las aplicaciones pre cargadas del teléfono


·         Customize

            Es aquel que contiene la customizacion de cada
            Operador así como configuraciones de wap, gprs y logos  
            de el menú


·         Gdfs

Es aquel que contiene la información de calibración como lo que son los simlocks, código de usuario, imei y calibración del área de seguridad, igualmente maneja la calibración de rf (bandas)


·         Erom

            Le llamamos erom al boot de el teléfono o como es conocido en Sony Ericsson ( cid ) puede variar las versiones pero las más comunes son desde cid 36,49,50,51,52,53,80,81 , la diferencia de el cid se define por el nivel de seguridad que utiliza cada uno y puede estar en diferentes niveles de seguridad

Brown, red, blue

·         Brown

Es un nivel de seguridad bajo que permite rehacer la zona de seguridad (gdfs) así como rescribir el área de simlocks

·         Red
           
             Es utilizada para tener la máxima seguridad en el teléfono, no podremos escribir ni modificar el área de calibración  (gdfs)


·         Blue

Es utilizado para equipos que se consideran prototipos que son equipos para investigación y desarrollo, es muy difícil que llegue a nosotros un equipo en este estado


Videos de Viajeros

Loading...